2005 Mazda 3 i, AutomaticFACTORY OEM SERVICE PROCEDURE

PCM Cover Installation Note

  1. Install with the PCM cover hooks B aligned with the PCM box holes.
    Fig 1: Installing/Aligning PCM Cover Hooks B With PCM Box Holes
    G03636013Courtesy of MAZDA MOTORS CORP.
  2. Install the PCM cover to the PCM box hook.
    Fig 2: Installing PCM Cover To PCM Box Hook
    G03636014Courtesy of MAZDA MOTORS CORP.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.