Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Mazda MPV ESFACTORY OEM SERVICE PROCEDURE
Manifold Absolute Pressure (Map) Sensor Inspection: Notes
WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Perform the following inspection only when directed.
- The following vacuum values are indicated by relative pressure from the MAP sensor.
- Connect the WDS or equivalent to the DLC-2.
- Turn the ignition switch to ON (Engine OFF).
- Select MAP PID on the WDS or equivalent.
- Verify that the MAP PID (pressure) and barometric pressure are practically equal.
- If not as verified, perform the CIRCUIT OPEN/SHORT INSPECTION .
- If there is no open or short circuit, replace the MAP sensor.
- If as verified, go to next step.
- If not as verified, perform the CIRCUIT OPEN/SHORT INSPECTION .
- Apply vacuum of -25.0 kPa {-187 mmHg, -7.38 inHg}
to the MAP sensor, and verify that the MAP variation from that of Step 4 is approx. 25.0 kPa {187 mmHg, 7.38 inHg}.
- If not as verified, perform the CIRCUIT OPEN/SHORT INSPECTION .
- If there is no open or short circuit, replace the barometric pressure sensor.
- If not as verified, perform the CIRCUIT OPEN/SHORT INSPECTION .
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.