Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System Check
Start engine, and let idle. IMRC actuator should not operate at engine speeds of less than 3300 RPM. Raise engine speed. IMRC actuator should operate at engine speeds of more than 3300 RPM. Using scan tool, check for DTCs. If DTC P1512, P1518 or P1520 are present, see appropriate test in SELF-DIAGNOSTICS - MPV. If DTCs are not present, start engine. Using scan tool, select SIMULATION TEST. Turn IMRC actuator on and off. If IMRC actuator operation is heard, check IMRC actuator cable tension and condition. Repair as necessary. If IMRC actuator operation is not heard, check Green/White wire between main relay and IMRC actuator terminal No. 2. Check Black/White wire between IMRC actuator terminal No. 3 and ground. Check wire between IMRC actuator terminal No. 1 (Black/Red wire) and PCM terminal No. 42 (Black/Yellow wire). Repair as necessary. If problem is not present, replace IMRC actuator.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.