2000 Mazda MPV ESFACTORY OEM SERVICE PROCEDURE

Functional Check

  1. With ignition key removed, ensure selector lever cannot be moved from "P" position. Insert key in ignition switch.
  2. Turn ignition on. Ensure selector lever can only be moved with brake pedal depressed. Move selector lever to "R" position.
  3. Ensure ignition key cannot be removed. Move selector lever to "P" position. Ensure ignition key is removable.
  4. If shift lock system does not operate as described, check selector lever, shift lock solenoid and control cable.
  5. Place selector lever in "P" position. On Miata and Millenia, push down emergency override button on shifter console using a screwdriver, and verify selector lever can be moved from "P" position. See Fig 1 and Fig 2 . On MPV, push down emergency override button on top of steering column cover. On all models, if selector lever cannot be moved from "P" position, replace shift lock actuator.
Fig 1: Locating Emergency Override Button (Miata)
G00020551Courtesy of MAZDA MOTORS CORP.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.