WHEEL ALIGNMENT SPECIFICATIONS (B2300, B3000 & B4000)

Application

LF ⁽²⁾

RF ⁽²⁾

Total/Split ⁽²⁾

2WD

Caster ⁽¹⁾

3-4

3.5-5.5

-.11 To .3

Camber

-.12 To .02

-.7 To .7

Toe @ Curb Ride Height

-.19 To .31

4WD

Caster ⁽¹⁾

2.9-4.9

3.5-4.5

-.12 To .02

Camber

-.12 To .02

-.7 To .7

Toe @ Curb Ride Height

-.13 To .37

⁽¹⁾	Zero degree frame angle. If vehicle is higher in rear, add frame angle to measured caster. If vehicle is lower in rear, subtract frame angle from measured caster. Compare total to specification.

⁽²⁾	Measurement is in degrees.

WHEEL ALIGNMENT SPECIFICATIONS (MIATA, MILLENIA, MPV, PROTEGE & 626)

Application

Preferred

Range

Miata

Camber ⁽¹⁾

Front

1.1 To -0.09

Rear

0.78

-.22 To 1.78

Caster ⁽¹⁾

5.8

4.8-6.8

Toe-In ⁽²⁾

Front & Rear

0.12 (3)

-0.03 To 0.27 (-1 To 7)

Toe-In ⁽¹⁾

Front & Rear

0.3

-0.21 To 0.27

Toe-Out On Turns ⁽¹⁾

Inner

35-41

Outer

30-36

Steering Axis Inclination (SAI) ⁽¹⁾

11.33

.....

Millenia

Camber ⁽¹⁾

Front

-0.18

-1.18 To 0.82

Rear

-0.23

-1.23 To 0.45

Caster ⁽¹⁾

1999

2.23

1.23 To 3.23

2000

2.13

1.13 To 3.13

Toe-In ⁽²⁾

Front & Rear

0.12 (3)

-0.04 To 0.28 (-1 To 7)

Toe-In ⁽¹⁾

Front & Rear

0.13

-0.11 To 0.37

Toe-Out On Turns ⁽¹⁾

Inner

33-39

Outer

27-33

Steering Axis Inclination (SAI) ⁽¹⁾

9.1

.....

MPV ⁽³⁾

Camber ⁽¹⁾

0.88

-.12 To 1.88

Caster ⁽¹⁾

1.73

.73 To 2.73

Toe-In ⁽²⁾

0.08 (2)

-.08 To 0.24 (-2 To 8)

Toe-In ⁽¹⁾

0.18

-.04 To 0.40

Toe-Out On Turns ⁽¹⁾

Inner

37.1

34.1-40.1

Outer

28-34

Steering Axis Inclination (SAI) ⁽¹⁾

11.2

.....

Protege

Camber ⁽¹⁾

Front

-0.78

-1.78 To 0.22

Rear

-0.45

-1.45 To 0.55

Caster ⁽¹⁾⁽³⁾

1.78

0.78 To 2.78

Toe-In ⁽²⁾

Front & Rear

0.08 (2)

-0.08 To 0.24 (-2 To 6)

Toe-In ⁽¹⁾

Front & Rear

0.2

-0.2 To 0.6

Toe-Out On Turns ⁽¹⁾

Inner

35-39

Outer

31-35

Steering Axis Inclination (SAI) ⁽¹⁾

12.53

.....

626 ⁽³⁾

Camber ⁽¹⁾

Front

-0.70

-1.70 To 0.30

Rear

-0.03

-1.03 To 0.7

Caster ⁽¹⁾

2.22

1.22 To 3.22

14" Wheel

2.15

1.15 To 3.15

15" Wheel

2.16

1.16 To 3.16

16" Wheel

2.06

1.06 To 3.06

Toe-In ⁽²⁾

Front & Rear

0.12 (3)

-.04 To 0.28 (-1 To 7)

Toe-In ⁽¹⁾

Front

0.28

-.10 To 0.66

Rear

0.33

-0.05 To 0.71

Toe-Out On Turns ⁽¹⁾

Inner

34-40

Outer

29-35

Steering Axis Inclination (SAI) ⁽¹⁾

15.07

.....

⁽¹⁾	Measurement in degrees.

⁽²⁾	Measurement in inches (mm).

⁽³⁾	Specifications listed are with fuel tank half full.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Wheel Alignment Specifications

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?