Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Mazda MPV DXFACTORY OEM SERVICE PROCEDURE
Torque Specifications
WARNING: This page is about a different car, the 2002 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| A/C Compressor Mounting Bolts | 12-16 (16-22) | |
| Charge Air Cooler (Left) Bolt/Nut | 14-18 (19-25) | |
| Generator Mounting Bolts (2.3L) | ||
| Long Bolt | 28-38 (38-51) | |
| Short Bolt | 14-18 (19-25) | |
| Generator Mounting Bolts (2.5L) | ||
| Lower Bolt | 28-38 (38-51) | |
| Rear Bolt | 14-18 (19-25) | |
| Upper Bolt | 14-18 (19-25) | |
| Generator Pulley Nut | 69-94 (94-127) | |
| INCH Lbs. (N.m) | ||
| Condenser Fan Component Retaining Bolts | 90-95 (7.9-10.7) | |
| Generator B+ Terminal Stud Nut | 87-130 (9.9-14.7) | |
| Splash Shield Retaining Bolts | 90-95 (7.0-10.7) | |
| Wiring Harness Bracket Retaining Bolt | 90-95 (7.9-10.7) | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.