1996 Mazda MPV DXFACTORY OEM SERVICE PROCEDURE

Functional Check

  1. With ignition key removed, ensure gear selector cannot be moved from Park. Insert key in ignition switch.
  2. Turn ignition on. Ensure gear selector can only be moved with brake pedal pressed down. Move gear selector to Reverse.
  3. Ensure ignition key cannot be removed, Move gear selector to Park. Ensure it is not possible to remove ignition key.
  4. If shift lock system does not operate as described, check gear selector, shift lock solenoid and control cable.
  5. On MPV, place gear selector in Park, depress and hold emergency override link. See Fig 1. On all other models, place gear selector in Park. Using a screwdriver, push down emergency override button on shifter console and verify gear selector can be moved from Park position. See Fig 2. On all models, if gear selector cannot be moved out of Park, adjust or replace shift lock actuator.
Fig 1: Locating Emergency Link Override (MPV)
G93H23157Courtesy of MAZDA MOTORS CORP.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.