Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Mazda MPV LFACTORY OEM SERVICE PROCEDURE
Wheel Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| MPV 2WD | |||||||||||
| 1995 | |||||||||||
| Camber (1) | 0.37 | -0.13 To 0.87 | |||||||||
| Caster (1) | |||||||||||
| Right | 5.95 | 5.20 To 6.70 | |||||||||
| Left | 5.45 | 4.70 To 6.2 0 | |||||||||
| Toe-In (2) | 0.16 (4.0) | 0.04 To 0.28 (1.0 To 7.0) | |||||||||
| Toe-In (1) | 0.4 | 0.1 To 0.7 | |||||||||
| Toe-Out On Turns (1) | |||||||||||
| Inner | 40.75 | - | |||||||||
| Outer | 31.83 | - | |||||||||
| Steering Axis Inclination (SAI) (1) | 12.93 | - | |||||||||
| 1996 (3) | |||||||||||
| Camber (1) | 0.37 | -0.63 To 1.37 | |||||||||
| Caster (1) | |||||||||||
| Right | 5.45 | 4.45 To 6.45 | |||||||||
| Left | 4.95 | 3.95 To 5.95 | |||||||||
| Toe-In (2) | 0.16 (4.0) | 0 To 0.32 (0 To 8.0) | |||||||||
| Toe-In (1) | 0.4 | 0 To 0.8 | |||||||||
| Toe-Out On Turns (1) | |||||||||||
| Inner | 40.75 | - | |||||||||
| Outer | 31.83 | - | |||||||||
| Steering Axis Inclination (SAI) (1) | 12.93 | - | |||||||||
| MPV 4WD | |||||||||||
| 1995 | |||||||||||
| Camber (1) | 0.17 | -0.33 To 0.67 | |||||||||
| Caster (1) | |||||||||||
| Right | 6.17 | 5.42 To 6.92 | |||||||||
| Left | 5.52 | 4.77 To 6.27 | |||||||||
| Toe-In (2) | 0.16 (4.0) | 0.04 To 0.28 (1.0 To 7.0) | |||||||||
| Toe-In (1) | 0.4 | 0.1 To 0.7 | |||||||||
| Toe-Out On Turns (1) | |||||||||||
| Inner | 33.83 | - | |||||||||
| Outer | 31.05 | - | |||||||||
| Steering Axis Inclination (SAI) (1) | 11.8 | - | |||||||||
| 1996 (3) | |||||||||||
| Camber (1) | 0.17 | -0.33 To 0.67 | |||||||||
| Caster (1) | |||||||||||
| Right | 5.52 | 4.52 To 6.52 | |||||||||
| Left | 5.02 | 4.02 To 6.02 | |||||||||
| Toe-In (2) | 0.16 (4.0) | 0 To 0.32 (0 To 8.0) | |||||||||
| Toe-In (1) | 0.4 | 0 To 0.8 | |||||||||
| Toe-Out On Turns (1) | |||||||||||
| Inner | 33.83 | - | |||||||||
| Outer | 31.05 | - | |||||||||
| Steering Axis Inclination (SAI) (1) | 11.8 | - | |||||||||
|
|||||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.