Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1994 Mazda MPV LXFACTORY OEM SERVICE PROCEDURE
Wheel Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range | ||||||
|---|---|---|---|---|---|---|---|---|
| 2WD | ||||||||
| Camber (1) | 0.37 | -0.13 To 0.87 | ||||||
| Caster (1) | ||||||||
| Right | 5.95 | 5.20 To 6.70 | ||||||
| Left | 5.45 | 4.70 To 6.20 | ||||||
| Toe-In (2) | 0.16 (4.0) | 0.04 To 0.28 (1.0 To 7.0) | ||||||
| Toe-In (1) | 0.4 | 0.1 To 0.7 | ||||||
| Toe-Out On Turns (1) | ||||||||
| Inner | 40.75 | N/A | ||||||
| Outer | 31.83 | N/A | ||||||
| Steering Axis Inclination (SAI) (1) | 12.93 | N/A | ||||||
| 4WD | ||||||||
| Camber (1) | 0.17 | -0.33 To 0.67 | ||||||
| Caster (1) | ||||||||
| Right | 6.17 | 5.42 To 6.92 | ||||||
| Left | 5.52 | 4.77 To 6.27 | ||||||
| Toe-In (2) | 0.16 (4.0) | 0.04 To 0.28 (1.0 To 7.0) | ||||||
| Toe-In (1) | 0.4 | 0.1 To 0.7 | ||||||
| Toe-Out On Turns (1) | ||||||||
| Inner | 33.83 | N/A | ||||||
| Outer | 31.05 | N/A | ||||||
| Steering Axis Inclination (SAI) (1) | 11.8 | N/A | ||||||
|
||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.