1994 Mazda 929FACTORY OEM SERVICE PROCEDURE

Keyless Entry System: Operation

When LOCK button is pressed, all doors should lock. If LOCK button is pressed 2 times within 5 seconds, horn will sound. When UNLOCK button is pressed, driver door will unlock. When UNLOCK button is pressed and held, all doors will unlock. If no doors are opened within 30 seconds after the UNLOCK button is pressed, press the AUTOLOCK button to relock all the doors.

Press and hold TRUNK button to unlock trunk lid. When PANIC button is pressed, the interior light will illuminate for 30 seconds. If PANIC button is pressed and held or pressed 2 times within 3 seconds, horn will sound intermittently and headlights and hazard lights will flash for 3 minutes. Press any button after pressing PANIC button to deactivate panic warning system.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.