Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
1993 Mazda MX-3 GS, Standard
Quick Lookups: Fluids
1993 Mazda MX-3 GS, StandardSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 1.75 LBS. | 0.79 KG | R-12 | S | |||
| Automatic Transmission Fluid | 6.70 QTS. | 6.34 L | Automatic Transmission Fluid M III or DEXRON II | S | |||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill to line on reservoir. | S | ||
| Engine Coolant | 1.8L Eng | 7.90 QTS. | 7.47 L | Ethylene Glycol Antifreeze Coolant | S | ||
| Engine Oil | 1.8L Eng | w/Filter | 4.20 QTS. | 3.97 L | API - SAE 5W-30 (Below -20Deg.F to 35Deg.F), 10W-30 (Below -10Deg.F to Above 120Deg.F) | S | |
| Engine Oil | 1.8L Eng | w/o Filter | 3.90 QTS. | 3.69 L | API - SAE 5W-30 (Below -20Deg.F to 35Deg.F), 10W-30 (Below -10Deg.F to Above 120Deg.F) | S | |
| Fuel Tank | 13.20 GALS. | 49.96 L | S | ||||
| Manual Transmission Fluid | 2.90 QTS. | 2.74 L | API - GL-4 or GL-5, SAE 75W-90 | Above 0Deg.F (-18Deg.C) SAE 80W-90, Below 0Deg. F (-18Deg.C) DEXRON II. | S | ||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid M III or DEXRON II | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.