Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1993 Mazda B2600i BaseFACTORY OEM SERVICE PROCEDURE
Wheel Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range | ||||||
|---|---|---|---|---|---|---|---|---|
| 2WD | ||||||||
| Camber (1) | 0.75 | 0.42 To 1.25 | ||||||
| Caster (1) | 0.83 | 0.08 To 1.58 | ||||||
| Toe-In (2) | 0.12 (3.0) | 0 To 0.24 (0 To 6.0) | ||||||
| Toe-In (1) | 0.3 | 0 To 0.6 | ||||||
| Toe-Out On Turns (1) | ||||||||
| Inner | 35 | N/A | ||||||
| Outer | 33 | N/A | ||||||
| Steering Axis Inclination (SAI) (1) | 8.25 | N/A | ||||||
| 4WD | ||||||||
| Camber (1) | 1.00 | 0.67 To 1.50 | ||||||
| Caster (1) | 2.00 | 1.25 To 2.75 | ||||||
| Toe-In (2) | .12 (3.0) | 0 To 0.24 (0 To 6.0) | ||||||
| Toe-In (1) | 0.3 | 0 To 0.6 | ||||||
| Toe-Out On Turns (1) | ||||||||
| Inner | 33.5 | N/A | ||||||
| Outer | 30.0 | N/A | ||||||
| Steering Axis Inclination (SAI) (1) | 10.33 | N/A | ||||||
|
||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
