Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Anti-Lock Brake System: Diagnosis: Notes
ABS system can only be diagnosed using ABS Tester (0000-42-0010). See Figure . An Adapter Harness (49N0-66-001) is also required to test Miata ABS system. ABS tester cannot diagnose ABS control unit. If a malfunction is detected in ABS and all other components in brake system are okay, replace ABS control unit.
If ABS tester is unavailable, test each component of ABS. See test procedures under TESTING. If all ABS components test okay, replace control unit with a known good unit, and retest system for correct operation.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.