Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
CEC System: Description
The Mazda RX7 computerized engine control system monitors various engine and vehicle functions to control engine operation and lower emissions while maintaining fuel economy and driveability.
The Electronic Control Unit (ECU), through various input sensors, monitors engine operation through the use of output devices such as fuel, air injection, ignition, EGR and turbo control systems. Knock control system is used on turbo models. Turbo operation is controlled by the turbo solenoid valve which receives controlling signals from the ECU.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.