1983 Mazda B2000 BaseFACTORY OEM SERVICE PROCEDURE

Rotary Engines

The system used on the rotary engine (RX7) is also a closed system and operates basically the same way as the piston engine arrangement.

Filtered air is drawn into the system through the air cleaner, mixed with the gases and vapors that blow by the rotor during engine operation, and is drawn out through a purge valve and into the intake manifold. The purge valve operates as the PCV valve in this system.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.