Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Lincoln Navigator Base, 4WDFACTORY OEM SERVICE PROCEDURE
Four-Wheel Drive Systems
- Description And Operation
- Diagnosis And Testing
- Four-Wheel Drive Systems - Vehicles With: 1-Speed Torque On Demand Transfer Case
- Inspection and Verification
- DTC Charts
- Symptom Charts
- Pinpoint Tests
- Pinpoint Test A : Four-Wheel Drive (4WD) System Functional Test
- Pinpoint Test B : DTC U300D:11
- Pinpoint Test C : DTCS P0562:00, P0563:00
- Pinpoint Test D : IWE Solenoid - Electrical Fault
- Pinpoint Test E : The Front Axle Does Not Engage/Disengage Correctly
- Pinpoint Test F : Four-Wheel Drive (4WD) Clutch Field Coil - Electrical
- Pinpoint Test G : U0100:00
- Pinpoint Test H : DTC U0101:00
- Pinpoint Test I : U0138:00
- Pinpoint Test J : U0140:00
- Pinpoint Test K : U0121:00
- Pinpoint Test L : U0140:00
- Pinpoint Test M : The Front Axle Makes Noise In 2H Mode Only And Generally Under Heavy Throttle
- Four-Wheel Drive Systems - Vehicles With: 2-Speed Torque On Demand Transfer Case
- Inspection and Verification
- DTC Charts
- Symptom Charts
- Pinpoint Tests
- Pinpoint Test A : Four-Wheel Drive (4WD) System Functional Test
- Pinpoint Test B : DTC U300D:11
- Pinpoint Test C : DTCS P0562:00, P0563:00
- Pinpoint Test D : IWE Solenoid - Electrical Fault
- Pinpoint Test E : The Front Axle Does Not Engage/Disengage Correctly
- Pinpoint Test F : Four-Wheel Drive (4WD) Clutch Field Coil - Electrical
- Pinpoint Test G : Shift Motor - Electrical Or Mechanical Fault
- Pinpoint Test H : U0100:00
- Pinpoint Test I : DTC U0101:00
- Pinpoint Test J : U0138:00
- Pinpoint Test K : U0140:00
- Pinpoint Test L : U0121:00
- Pinpoint Test M : U0140:00
- Pinpoint Test N : DTC U0155:00
- Pinpoint Test O : The Front Axle Makes Noise In 2H Mode Only And Generally Under Heavy Throttle
- Four-Wheel Drive Systems - Vehicles With: 1-Speed Torque On Demand Transfer Case
- General Procedures
- Removal And Installation
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
