Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Lincoln MKZ Base, AWDFACTORY OEM SERVICE PROCEDURE
Module Configuration and Parameter Chart
WARNING: This page is about a different car, the 2018 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.
The chart describes specific module configuration information:
| Module Name | Programmable Module Installation (PMI) Available | Reprogram/Flash Capable | Requires Adaptive Learning or Calibration | Available Progammable Parameters |
|---|---|---|---|---|
| ABS module (Stability control and hill start assist) | Yes | Yes | IVD initialization | None |
| APIM | Yes | Yes | No | None |
| ACM | Yes | Yes | No | Audio presets |
| BCM | Yes | Yes | No | Automatic locking/unlocking by speed enable/disable Tire size |
| FCDIM | No | Yes | No | None |
| FCIM | No | Yes | No | None |
| GPSM | Yes | Yes | No | None |
| HVAC module | No | Yes | No | None |
| IPC | Yes | Yes | No | Automatic locking/unlocking by speed enable/disable Tire size |
| OCSM | No | Yes | Seat weight sensor re-zero | None |
| PSCM | No | Yes | No | None |
| PCM | Yes | Yes | No | None |
| RFA module | No | Yes | No | None |
| RCM | Yes | Yes | No | None |
| TCM | Yes | Yes | Yes | None |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.