Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Lincoln MKT Base, AWDFACTORY OEM SERVICE PROCEDURE
Torque Specifications
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Camshaft Position(CMP) sensor bolts - 2.0L GTDI | 6 | - | 53 | ||
| Camshaft Position(CMP) sensor bolts - 3.5L Ti-VCT, 3.5L GTDI | 10 | - | 89 | ||
| Catalyst Monitor Sensor(CMS) (1) | - | - | - | ||
| Crankshaft Position(CKP) sensor bolt - 2.0L GTDI (1) | - | - | - | ||
| Crankshaft Position(CKP) sensor bolt - 3.5L Ti-VCT, 3.5L GTDI | 10 | - | 89 | ||
| Cylinder Head Temperature(CHT) sensor | 11 | - | 97 | ||
| Engine plug bolt - 2.0L GTDI | 10 | - | 89 | ||
| Fuel Rail Pressure(FRP) sensor - 2.0L GTDI (1) | - | - | - | ||
| Fuel Rail Pressure(FRP) sensor - 3.5L GTDI | 33 | 24 | - | ||
| Heated Oxygen Sensor(HO2S) (1) | - | - | - | ||
| Heat shield bolt and nut | 10 | - | 89 | ||
| Knock Sensor(KS) bolt | 20 | - | 177 | ||
| Turbocharger Boost Pressure(TCBP) / Charge Air Cooler Temperature(CACT) | 3 | - | 27 | ||
| Manifold Absolute Pressure(MAP) sensor | 6 | - | 53 | ||
| Manifold Absolute Pressure(MAP) /Intake Air Temperature 2(IAT2) | 6 | - | 53 | ||
| Manifold Absolute Pressure and Temperature(MAPT) | 8 | - | 71 | ||
| Mass Air Flow(MAF) sensor screws | 2 | - | 18 | ||
| PCM nuts | 8 | - | 71 | ||
| RH halfshaft bracket nuts and bolts | 25 | 18 | - | ||
| Throttle Position(TP) sensor | 3 | - | 27 | ||
| Variable Camshaft Timing(VCT) oil control solenoid bolts | 10 | - | 89 | ||
|
|||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.