2015 Lincoln MKX AWDFACTORY OEM SERVICE PROCEDURE

External Controls: Notes

6F50/6F55 

GFD98961Courtesy of FORD MOTOR COMPANY
Item Part Number Description
1 7A257 7A257 Manual control lever
2 - Adjuster locking tab (part of 7E395)
3 7E395 7E395 Selector lever cable
4 7B229 7B229 Selector lever cable bracket
5 - Selector lever cable grommet (part of 7E395)
6 7210 7210 Selector lever assembly
7 7213 7213 Selector lever knob
8 - SelectShift™ switch (part of 7213)

The transmission selector lever linkage consists of:

  • a selector lever cable that connects the transmission manual control lever to the selector lever assembly.
  • a BSIA that is integral to the selector lever assembly.
  • a TCS that turns off the operation of 6th gear.

The selector lever assembly:

  • locks the transmission selector lever in the PARK position when the ignition switch is in the LOCK position.
  • requires the transmission selector lever to be in the PARK position to turn the ignition switch to the LOCK position.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.