Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2015 Lincoln MKX AWDFACTORY OEM SERVICE PROCEDURE
Steering Column Control Module (SCCM)
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B1007:09 | High-Beam Headlamp Switch: Component Failure | INSTALL a new multifunction switch. REFER to Steering Column Switches . TEST the system for normal operation. If the concern still exists, INSTALL a new SCCM. REFER to Steering Column Switches . TEST the system for normal operation. |
| B1D36:09 | Turn Indicator Switch: Component Failure | INSTALL a new multifunction switch. REFER to Steering Column Switches . TEST the system for normal operation. If the concern still exists, INSTALL a new SCCM. REFER to Steering Column Switches . TEST the system for normal operation. |
| All other DTCs | - | REFER to the Diagnostic Trouble Code (DTC) Chart in Multifunction Electronic Modules . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.