Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Lincoln MKT Base, AWDFACTORY OEM SERVICE PROCEDURE
Body Control Module (BCM)
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B1317:11 | Third Row Power Fold Seat Output: Circuit Short To Ground | GO to PINPOINT TEST BT . |
| B1317:15 | Third Row Power Fold Seat Output: Circuit Short To Battery or Open | If the third row power-fold seats do not operate, GO to PINPOINT TEST BT
. If the third row power-fold seats do operate, REPAIR the Power-Fold Seat Module (PFSM) enable circuit CPS48 (BU) for a short to voltage. CLEAR the DTCs. REPEAT the self-test. TEST the system for normal operation. |
| All Other DTCs | - | REFER to MULTIFUNCTION ELECTRONIC MODULES . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.