2013 Lincoln MKT Base, FWDFACTORY OEM SERVICE PROCEDURE

Charging System DTCS

CHARGING SYSTEM DTC CHART

DTC Description Action
P0562 System Voltage Low GO to PINPOINT TEST B .
P0563 System Voltage High GO to PINPOINT TEST A .
P0620 Generator Control Circuit GO to PINPOINT TEST C .
P0625 Generator Field Terminal Circuit Low GO to PINPOINT TEST D .
P0626 Generator Field Terminal Circuit High GO to PINPOINT TEST D .
P065B Generator Control Circuit Range/Performance GO to PINPOINT TEST E .
P0A5A Generator Current Sensor Circuit Range/Performance GO to PINPOINT TEST H .
P0A5B Generator Current Sensor Circuit Low GO to PINPOINT TEST H .
P0A5C Generator Current Sensor Circuit High GO to PINPOINT TEST H .
P1397 System Voltage Out Of Self-Test Range If combined with P0562, GO to PINPOINT TEST B . If combined with P0563, GO to PINPOINT TEST A .
U1007:31 Lost Communication With Battery Monitoring Sensor "A": No Signal GO to PINPOINT TEST I .
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to PINPOINT TEST B .
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to PINPOINT TEST A .
All other DTCs - REFER to MULTIFUNCTION ELECTRONIC MODULES or the PCM DTC Chart in ELECTRONIC ENGINE CONTROLS . If directed to this information from another procedure, GO to SYMPTOM CHART .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.