2012 Lincoln Navigator RWDFACTORY OEM SERVICE PROCEDURE

All Columns

Fig 1: Steering Column Replacement Components With Torque Specifications - All Columns (1 Of 2)
G06126022Courtesy of FORD MOTOR CO.
Item Part Number Description
8 W504142 Multifunction switch carrier bolt (3 required)
9 3F888 Multifunction switch carrier
10 11B572 Ignition switch screw
11 11572 Ignition switch
12 15607 Passive Anti-Theft System (PATS) transceiver
13 N802141 Steering wheel rotation sensor bolt (2 required)
14 3F818 Steering wheel rotation sensor
15 3A510 Lower steering column bearing


Fig 1: Steering Column Replacement Components With Torque Specifications - All Columns (2 Of 2)
G06126023Courtesy of FORD MOTOR CO.
Item Part Number Description
16 3A505 Tilt housing spring
17 3D739 Steering column tilt housing and upper shaft assembly screw (2 required)
18 3F957 Tilt lever
19 3D678 Tilt lever spring
20 3F854 Steering column tilt housing and upper shaft assembly
21 3D657 Steering column lower shaft
22 3C529 Steering column
23 3D693 Tilt bumper

All columnsΒ 

  1. Remove the steering column. For additional information, refer to Steering ColumnΒ .
  2. NOTE: Do not apply excessive force to the column while mounted to the Transmission Holding Fixture or damage to the column may occur.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.