2012 Lincoln MKZ HybridFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil Gas/Electric 4.40 OZS. 0.13 L YN-32 S
Air Cond Refrigerant 1.38 LBS. 0.62 KG R-134a S
Automatic Transmission Fluid Hybrid 4.28 QTS. 4.05 L MOTORCRAFT Automatic Transmission Fluid MERCON LV Using any transmission fluid other than those that meet the recommended specification may cause internal transmission damage. Do not use Motorcraft MERCON CVT (blue) ATF. This vehicle uses only Motorcraft MERCON LV ATF. S
Brake Fluid N/A N/A MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid Fill between "max" and "min" lines on reservoir. S
Engine Coolant Hybrid Engine Cooling System 9.30 QTS. 8.8 L MOTORCRAFT Specialty Green (dark green-colored) or Orange Engine Coolant Add the coolant type originally equipped in the vehicle. S
Engine Coolant Hybrid Motor Electric Coolant 2.80 QTS. 2.64 L MOTORCRAFT Specialty Green (dark green-colored) or Orange Engine Coolant Add the coolant type originally equipped in the vehicle. S
Engine Oil Hybrid w/Filter 5.00 QTS. 4.73 L SAE 5W-20 Premium Synthetic Blend Motor Oil Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark. S
Fuel Tank FWD 17.50 GALS. 66.24 L S
Transfer Case Fluid Power Transfer Unit 12.00 OZS. 0.35 L MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant S
Windshield Washer Fluid N/A N/A MOTORCRAFT Premium Windshield Washer Concentrate Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.