2012 Lincoln MKT Base, FWDFACTORY OEM SERVICE PROCEDURE

Module Configuration System DTCS

DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Source Action
B2477 Module Configuration Failure ABS module Dual Climate Controlled Seat Module (DCSM) Driver Door Module (DDM) Driver Seat Module (DSM) Parking Aid Module (PAM) Restraints Control Module (RCM) Smart Junction Box (SJB) CARRY OUT Programmable Module Installation (PMI). REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
B2900 VIN Mismatch 4X4 control module The PCM Vehicle Identification Number (VIN) is not correct. CARRY OUT PMI for the PCM. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
B2900 VIN Mismatch ABS module RCM CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0602 Powertrain Control Module Programming Error PCM CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0605 Internal Control Module Read Only Memory (ROM) Error PCM CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P1639 Vehicle ID Block Corrupted, Not Programmed PCM CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P163E Transmission Control Module Programming Error PCM CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P163F Transmission ID Block Corrupted, Not Programmed PCM CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U0300 Internal Control Module Software Incompatibility PCM CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U201A:51 Control Module Main Calibration Data: Missing Calibration Front Controls Interface Module (FCIM) INSTALL a new FCIM. REFER to INFORMATION AND ENTERTAINMENT SYSTEMS .
U201A:51 Control Module Main Calibration Data: Missing Calibration Audio Front Control Module (ACM) Audio Digital Signal Processing (DSP) module CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U201A:54 Control Module Main Calibration Data: Not Programmed Headlamp Control Module 2 (HCM-2) CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2050 No Application Present 4X4 control module INSTALL a new 4X4 control module. REFER to FOUR WHEEL DRIVE (4WD) SYSTEMS .
U2050 No Application Present ABS module DCSM DDM DSM Liftgate/Trunk Module (LTM) RCM Steering Angle Sensor Module (SASM) SJB CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2050 No Application Present Occupant Classification System Module (OCSM) INSTALL a new OCSM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM .
U2051 One or More Calibration Files Missing/Corrupt 4X4 control module INSTALL a new 4X4 control module. REFER to FOUR WHEEL DRIVE (4WD) SYSTEMS .
U2051 One or More Calibration Files Missing/Corrupt LTM CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2051 One or More Calibration Files Missing/Corrupt PAM INSTALL a new PAM. REFER to PARKING AID .
U2100:00 Initial Configuration Not Complete: No Sub Type Information ACM Audio DSP module HCM-2 IPC Side Obstacle Detection Control Module - Left (SOD-L) Side Obstacle Detection Control Module - Right (SOD-R) CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information APIM CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING .
U2100:55 Initial Configuration Not Complete: Not Configured Remote Function Actuator (RFA) module CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information ACM Audio DSP module CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information APIM CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING .
U3000:55 Control Module: Not Configured HVAC module INSTALL a new HVAC module. REFER to CLIMATE CONTROL .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.