Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Lincoln Navigator 4WDFACTORY OEM SERVICE PROCEDURE
Module Communication Network DTCS
COMMUNICATION NETWORK DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Action |
|---|---|---|---|
| U0001 | High Speed CANÂ Communication Bus | ABS module | The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool. |
| U0073 | Control Module Communication Bus A Off | Vehicle Dynamics Module (VDM) | The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. |
| Transmission Control Module (TCM) | REPEAT the network test with the scan tool. | ||
| U0100 | Lost Communication With ECMÂ /PCM | 4X4 control module ABS module Instrument Cluster (IC) TCMÂ VDMÂ |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST A . |
| U0101 | Lost Communication With TCMÂ | ABS module ICÂ |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST G . |
| U0102 | Lost Communication With Transfer Case Control Module (4x4CM) | ICÂ TCMÂ |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST E . |
| U0114 | Lost Communication With Four-Wheel Drive Clutch Control Module | ABS module | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST E . |
| U0121 | Lost Communication With ABS Control Module | 4X4 control module ICÂ TCMÂ |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST B . |
| U0122 | Lost Communication With Vehicle Dynamics Control Module | ICÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST F . |
| U0140 | Lost Communication With Body Control Module (GEMÂ ) | ABS module Driver Seat Module (DSM) ICÂ Liftgate/Trunk Module (LTM) Parking Aid Module (PAM) VDMÂ |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST H . |
| U0140 | Lost Communication With Body Control Module (GEMÂ ) | Audio Control Module (ACM) Audio Rear Control Unit (RCU) module Global Positioning System Module (GPSM) |
Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0140:00 | Lost Communication With Body Control Module (GEM): No Sub Type Information | ACMÂ Audio Digital Signal Processing (DSP) module GPSMÂ |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST H . |
| U0151 | Lost Communication With Restraints Control Module | ICÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST D . |
| U0155 | Lost Communication With Instrument Panel Cluster (ICÂ ) Control Module | ACMÂ | Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0155 | Lost Communication With Instrument Panel Cluster (ICÂ ) Control Module | ABS module DSMÂ LTMÂ PAMÂ Smart Junction Box (SJB) VDMÂ |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST C . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (ICÂ ) Control Module: No Sub Type Information | ACMÂ Audio DSPÂ module GPSMÂ |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST C . |
| U0159 | Lost Communication With Parking Assist Control Module (PAMÂ ) | ACMÂ ICÂ |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST R . |
| U0159:00 | Lost Communication With Parking Assist Control Module (PAMÂ ): No Sub Type Information | ACMÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST R . |
| U0164 | Lost Communication With HVAC Control Module (EATCÂ ) | ICÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST I . |
| U0164:00 | Lost Communication With HVAC Control Module (EATCÂ ): No Sub Type Information | ACMÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST I . |
| U0184 | Lost Communication With Radio (ACMÂ ) | Accessory Protocol Interface Module (APIM) Audio DSPÂ module Audio RCUÂ module Satellite Digital Audio Receiver System (SDARS) module |
Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0184:00 | Lost Communication With Radio (ACMÂ ): No Sub Type Information | Audio DSPÂ module | Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0193 | Lost Communication With Digital Audio Control Module (SDARSÂ ) | ACMÂ Audio RCUÂ module |
Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0193:00 | Lost Communication With Digital Audio Control Module (SDARSÂ ): No Sub Type Information | ACMÂ | Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0196 | Lost Communication With Entertainment Control Module - Rear (AUX) | ACMÂ APIMÂ SDARSÂ module Audio DSPÂ module |
Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0196:00 | Lost Communication With Entertainment Control Module - Rear (AUX): No Sub Type Information | ACMÂ Audio DSPÂ module |
Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0197 | No Communication With the APIMÂ | ACMÂ SDARSÂ module |
This DTC refers to the APIMÂ , not the telephone control module. Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0197:00 | No Communication With the APIMÂ : No Sub Type Information | ACMÂ Audio DSPÂ module |
This DTC refers to the APIMÂ , not the telephone control module. Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0208 | Lost Communication With Seat Control Module | ICÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST O . |
| U0230 | Lost Communication With Rear Gate Module (LTMÂ ) | ICÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST J . |
| U0238 | Lost Communication With Digital Audio Control Module "D" (DSPÂ ) | ACMÂ | Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0238:00 | Lost Communication With Digital Audio Control Module "D" (DSPÂ ): No Sub Type Information | ACMÂ | Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0244 | Lost Communication With Running Board Control Module (PRBÂ ) | ICÂ | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to PINPOINT TEST P . |
| U0249 | Lost Communication With Entertainment Control Module - Rear "B" (RCUÂ ) | ACMÂ APIMÂ SDARSÂ module |
Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0249:00 | Lost Communication With Entertainment Control Module - Rear "B" (RCUÂ ): No Sub Type Information | ACMÂ | Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0255 | Lost Communication With Front Controls Interface Module | APIMÂ SDARSÂ module |
Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0255:00 | Lost Communication With Front Display Interface Module: No Sub Type Information | ACMÂ | Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0256 | Lost Communication With Front Display Interface Module | APIMÂ SDARSÂ module |
Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0256:00 | Lost Communication With Front Controls Interface Module: No Sub Type Information | ACMÂ | Refer to DRIVER INFORMATION SYSTEM & ENTERTAINMENT SYSTEM . |
| U0401 | Invalid Data Received from ECMÂ /PCM A | ABS module | RETRIEVE and FOLLOW the DTCs from the PCM. |
| U0402 | Invalid Data Received from TCMÂ | ABS module | RETRIEVE and FOLLOW the DTCs from the TCMÂ . |
| U0414 | Invalid Data Received from Four-Wheel Drive Clutch Control Module | ABS module | Retrieve and follow DTCs from the 4X4 control module. |
| U0415 | Invalid Data Received from ABS Control Module | 4X4 control module | RETRIEVE and FOLLOW the DTCs from the ABS module. |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | GPSMÂ | RETRIEVE and FOLLOW DTCs from the SJBÂ . |
| U0423:00 | Invalid Data Received From Panel Cluster Control Module: No Sub Type Information | GPSMÂ | RETRIEVE and FOLLOW DTCs from the ICÂ . |
| U1900 | CANÂ Communication Bus Fault-Receive Error | 4X4 control module Power Running Board (PRB) module Restraints Control Module (RCM) |
Go to SYMPTOM CHART for the module that failed the network test. |
| U1901 | CANÂ Network #2 Communication Bus Fault-Receive Error | ABS module | Refer to ANTI-LOCK BRAKE SYSTEM - VEHICLE DYNAMIC SYSTEM . |
| U2011 | Module Transmitted Invalid Data (Non SCPÂ ) | VDMÂ | RETRIEVE and FOLLOW non-network DTCs from other modules. Refer to MULTIFUNCTION ELECTRONIC MODULE . |
| U2013 | Compass Module is not Responding | ICÂ | Refer to INSTRUMENTATION SYSTEM, MESSAGE CENTER & WARNING CHIMES . |
| U2023 | Fault Received From External Node | 4X4 control module ICÂ PAMÂ |
DTC U2023 is set when a module receives invalid network data from another module with a faulted input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. Refer to MULTIFUNCTION ELECTRONIC MODULE for a list of all DTCs. |
| U2471 | Unexpected PRNDL State | DSMÂ LTMÂ PAMÂ |
RETRIEVE and FOLLOW non-network DTCs from other modules. Refer to MULTIFUNCTION ELECTRONIC MODULE . |
| U2472 | Unexpected Ignition State | ICÂ LTMÂ PAMÂ SJBÂ |
RETRIEVE and FOLLOW non-network DTCs from other modules. Refer to MULTIFUNCTION ELECTRONIC MODULE . |
| U2473 | Unexpected Vehicle Speed (VSSÂ ) | ACMÂ PAMÂ LTMÂ SJBÂ |
RETRIEVE and FOLLOW non-network DTCs from other modules. Refer to MULTIFUNCTION ELECTRONIC MODULE . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
