2011 Lincoln Navigator 4WDFACTORY OEM SERVICE PROCEDURE

Module Communication Network - Module Configuration DTCS

MODULE COMMUNICATION NETWORK - MODULE CONFIGURATION DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Source Action
B2477 Module Configuration Failure
  • ABS module
  • Audio Control Module (ACM)
  • Audio Rear Control Unit (RCU)
  • Driver Seat Module (DSM)
  • Dual Climate Controlled Seat Module (DCSM)
  • Instrument Cluster (IC)
  • Parking Aid Module (PAM) - Expedition
  • Restraints Control Module (RCM)
  • Satellite Digital Audio Receiver System (SDARS) module
  • Smart Junction Box (SJB)
Carry out PMIĀ  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
B2477 Module Configuration Failure
  • Accessory Protocol Interface Module (APIM)
Carry out APIMĀ  programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this information.
B2477 Module Configuration Failure PAMĀ  - Navigator INSTALL a new PAMĀ  . Refer to PARKING AID .
B2477 Module Configuration Failure
  • Vehicle Dynamics Module (VDM)
INSTALL a new VDMĀ  . Refer to VEHICLE DYNAMIC SUSPENSION .
B2900 Vehicle Identification Number (VIN) mismatch
  • ABS module
  • RCMĀ 
Carry out PMIĀ  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
P0602 Powertrain Control Module Programming Error
  • PCM
Carry out PMIĀ  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
P0605 Internal Control Module Read Only Memory (ROMĀ  ) Error
  • PCM
Carry out PMIĀ  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
P0605 Internal Control Module Read Only Memory (ROMĀ  ) Error
  • Transmission Control Module (TCM)
INSTALL a new TCMĀ  . Refer to AUTOMATIC TRANSMISSION - 6R80 .
P1639 Vehicle ID Block Corrupted, Not Programmed
  • PCM
Carry out PMIĀ  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
U0300 Internal Control Module Software Incompatibility
  • PCM
  • RCMĀ 
Carry out PMIĀ  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
U201A:51 Control Module Main Calibration Data: Missing Calibration
  • ACMĀ 
  • Audio Digital Signal Processing (DSP) module
Carry out PMIĀ  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
U2050 No Application Present
  • ABS module
  • ACMĀ 
  • Audio RCUĀ 
  • DCSMĀ 
  • DSMĀ 
  • ICĀ 
  • PAMĀ 
  • PCM
  • RCMĀ 
  • SDARSĀ  module
  • SJBĀ 
  • TCMĀ 
Carry out PMIĀ  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
U2050 No Application Present 4X4 control module INSTALL a new 4X4 control module. Refer to FOUR WHEEL DRIVE (4WD) SYSTEMS .
U2050 No Application Present
  • APIMĀ 
Carry out APIMĀ  programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this information.
U2050 No Application Present
  • HVAC module
INSTALL a new HVAC module. Refer to CLIMATE CONTROL .
U2050 No Application Present
  • Liftgate/Trunk Module (LTM)
INSTALL a new LTMĀ  . Refer to BODY PANEL SYSTEM - BODY CLOSURES .
U2050 No Application Present
  • Power Running Board (PRB) module
INSTALL a new PRB module. Refer to EXTERIOR TRIM & ORNAMENTATION .
U2050 No Application Present
  • VDMĀ 
INSTALL a new VDMĀ  . Refer to VEHICLE DYNAMIC SUSPENSION .
U2051 One or More Calibration Files Missing/Corrupt
  • ACMĀ 
  • ICĀ 
  • PAMĀ  - Expedition
  • PCM
  • RCMĀ 
Carry out PMIĀ  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
U2051 One or More Calibration Files Missing/Corrupt
  • LTMĀ 
INSTALL a new LTMĀ  . Refer to BODY PANEL SYSTEM - BODY CLOSURES .
U2051 One or More Calibration Files Missing/Corrupt
  • PAMĀ  - Navigator
INSTALL a new PAMĀ  . Refer to PARKING AID .
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • ACMĀ 
  • Audio DSPĀ  module
Carry out PMIĀ  . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this information.
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • APIMĀ 
Carry out APIMĀ  programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this information.
U2101:00 Initial Configuration Incompatible: No Sub Type Information
  • APIMĀ 
Carry out APIMĀ  programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this information.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.