Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

MODULE CONFIGURATION AND PARAMETER CHART

Module Name	Requires PMI	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Programmable Parameters
Accessory Protocol Interface Module (APIM)	Yes	Yes	No	Clock display
ABS module	Yes	Yes	IVD initialization	Tire size (must match BCM )
Audio Control Module (ACM)	Yes	Yes	No	None
Audio Digital Signal Processing (DSP) module	Yes	Yes	No	None
Body Control Module (BCM)	Yes	Yes	No	Axle ratio Courtesy lamp dimming type Police dark car feature Smart unlocking Stop and turn lamp outage configuration Tire placard pressure Tire size (must match ABS module)
Cruise-Control Module (CCM)	Yes	Yes	No	None
Driver Seat Module (DSM)	Yes	Yes	No	None
Dual Climate Controlled Seat Module (DCSM)	Yes	Yes	No	None
Front Lighting Control Module (FLM)	No	Yes	No	None
Front Controls Interface Module (FCIM)	No	Yes	No	None
Front Control/Display Interface Module (FCDIM)	Yes	Yes	No	None
Global Positioning System Module (GPSM)	No	Yes	No	None
Heated Steering Wheel Module (HSWM)	Yes	Yes	No	None
Headlamp Control Module (HCM)	No	Yes	No	None
Head Up Display (HUD) module	No	Yes	No	None
HVAC module	No	Yes	No	None
Instrument Panel Cluster (IPC)	Yes	Yes	No	Belt-Minder® English/Metric Language Rear fog lamps Rear reverse gear wipe
Liftgate/Trunk Module (LTM)	No	Yes	No	None
Occupant Classification System Module (OCSM)	No	Yes	OCS re-zero	None
Parking Aid Module (PAM)	No	Yes	No	None
PCM	Yes	Yes	Adaptive airflow Axle ratio Idle speed Refueling event Fuel trim present Tire size	None
Remote Function Actuator (RFA) module	Yes	Yes	No	Intelligent Access (IA)
Restraints Control Module (RCM)	Yes	Yes	No	Driver Belt-Minder® Passenger Belt-Minder®
Steering Column Control Module (SCCM)	Yes	Yes	No	None
Side Obstacle Detection Control Module - Left (SOD-L)	Yes	Yes	No	On/Off
Side Obstacle Detection Control Module - Right (SOD-R)	Yes	Yes	No	On/Off
Tire Pressure Monitor (TPM)	No	Yes	No	None

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Module Configuration and Parameter Chart

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?