2008 Lincoln MKZ AWDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil Gas 6.00 OZS. 0.17 L YN-12-D S
Air Cond Refrigerant 1.30 LBS. 0.58 KG R-134a S
Automatic Transmission Fluid 7.40 QTS. 7 L MOTORCRAFT Premium Automatic Transmission Fluid Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. S
Brake Fluid N/A N/A MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid Fill to line on reservoir. S
Engine Coolant 10.00 QTS. 9.46 L FORD Premium Gold Engine Coolant w/bittering agent Add the coolant type originally equipped in the vehicle. S
Engine Oil w/Filter 5.50 QTS. 5.2 L SAE 5W-20 Premium Synthetic Blend Motor Oil Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark. S
Fuel Tank AWD 16.50 GALS. 62.45 L S
Power Steering Fluid N/A N/A MOTORCRAFT Automatic Transmission Fluid MERCON V Fill between "max" and "min" lines on reservoir. S
Transfer Case Fluid AWD Power Transfer Unit 0.37 QTS. 0.35 L SAE 75W-140 Synthetic Rear Axle Gear Oil The Power Transfer Unit is lubricated for life with synthetic lube. Lubricant levels are not to be checked or changed unless a leak is suspected or repair required. Replace Power Transfer Unit lubricant with specified synthetic lubricant anytime the unit is submerged in water. S
Windshield Washer Fluid 4.75 QTS. 4.49 L MOTORCRAFT Premium Windshield Washer Concentrate Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.