Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Lincoln LSFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Case-to-center support bolt | 11 | 8 | - |
| Digital transmission range (TR) sensor-to-case screws | 8 | - | 71 |
| Transmission output shaft flange coupler bolts and nuts | 81 | 60 | - |
| Extension housing screws and studs | 30 | 22 | - |
| Fluid level indicator plug-to-drain pipe assembly | 10 | - | 89 |
| Fluid pan drain plug | 26 | 19 | - |
| Fluid pump housing screws | 22 | 16 | - |
| Heat shield screws | 10 | - | 89 |
| Locknut for band adjustment | 54 | 40 | - |
| Main control-to-case screws | 10 | - | 89 |
| Manual control valve detent spring-to-case screw | 10 | - | 89 |
| Manual control lever shaft nut | 48 | 35 | - |
| Output shaft-to-flange nut | 131 | 97 | - |
| Band adjustment screw | 14 | 10 | - |
| Pressure tap plug to case | 14 | 10 | - |
| Pump assembly-to-case screws | 25 | 18 | - |
| Reverse servo assembly-to-case screws (stage 1) | 5 | - | 44 |
| Reverse servo assembly-to-case screws (stage 2) | 11 | 8 | - |
| Separator to main control screws | 7 | - | 62 |
| Shift cable bracket screws | 28 | 21 | - |
| Solenoid body-to-case screws | 8 | - | 71 |
| Speed sensor-to-case screws | 14 | 10 | - |
| Torque converter adapter plate nuts to converter | 40 | 30 | - |
| Torque converter adapter plate-to-flexplate nut | 40 | 30 | - |
| Transmission cooler tube fitting to case | 47 | 35 | - |
| Transmission cooler tube nut to case fitting | 40 | 30 | - |
| Transmission fluid filter-to-case screws | 10 | - | 89 |
| Transmission fluid pan-to-case screws | 11 | 8 | - |
| Transmission insulator-to-extension housing center screw | 48 | 35 | - |
| Transmission mount-to-crossmember screws | 63 | 46 | - |
| Transmission crossmember-to-floor pan screws | 55 | 41 | - |
| Transmission-to-engine screws | 48 | 35 | - |
| Vehicle harness-to-solenoid body screw | 5 | - | 44 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.