Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Lincoln LSFACTORY OEM SERVICE PROCEDURE
Steering Column DTCS
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE LIST
| DTC | Description | Source | Action |
|---|---|---|---|
| B1342 | ECU is Defective | Instrument Cluster | CLEAR the DTC. REPEAT the self-test. If other DTCs are retrieved, repair those and REPEAT the self-test. If DTC B1342 is retrieved again, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . |
| B2328 | Steering Column Reach (Telescopic) Feedback Potentiometer Circuit Failure | Instrument Cluster | Go To PINPOINT TEST A . |
| B2332 | Steering Column Tilt Feedback Potentiometer Circuit Failure | Instrument Cluster | Go To PINPOINT TEST B . |
| B2351 | Tilt and Telescopic Adjustments are Inoperative | Instrument Cluster | Go To PINPOINT TEST C . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.