2006 Lincoln LSFACTORY OEM SERVICE PROCEDURE

Navigation System DTCS

NAVIGATION SYSTEM MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Source Action
B1342 ECU is Defective Navigation Module CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is retrieved again, INSTALL a new navigation module. REFER to NAVIGATION MODULE . CLEAR the DTCs. REPEAT the self-test.
B2103 Antenna Not Connected Navigation System Module Go To PINPOINT TEST C .
B2139 Data Mismatch Navigation Module CLEAR the DTCs. REPEAT the self-test. If DTC B2139 is retrieved again, REMOVE the navigation module. REFER to NAVIGATION MODULE . SEND it to an authorized repair facility. CLEAR the DTCs. REPEAT the self-test.
B2204 GPS Antenna Connection Open or Short Navigation Module Go To PINPOINT TEST K .
B2208 Navigation to Head Unit Communication Error Navigation Module Go To PINPOINT TEST R .
B2403 Audio CDDJ Internal Fault Navigation System Module REMOVE the audio unit and SEND it to an authorized audio system repair facility. REFER to AUDIO UNIT . TEST the system for normal operation after the repair.
B2404 Audio Steering Wheel Switch Circuit Fault Navigation System Module Go To PINPOINT TEST H .
B2477 Module Configuration Failure Navigation Module CHECK the navigation module configuration. REFER to MODULE CONFIGURATION .
B2633 Driver - Front Microphone Circuit Failure Navigation Module Go To PINPOINT TEST S .
B2858 Audio Unit Is Defective Navigation System Module REMOVE the audio unit and SEND it to an authorized audio system repair facility. REFER to AUDIO UNIT . TEST the system for normal operation after the repair.
B2913 Subwoofer Not Connected Navigation System Module Go To PINPOINT TEST G .
C1192 Vehicle Speed Circuit Failure Navigation Module Go To PINPOINT TEST L .
U1016 SCP Invalid Data (PCM) Navigation Module Go To PINPOINT TEST T .
All other DTCs - Navigation System Module REFER to MULTIFUNCTION ELECTRONIC MODULES .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.