Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Lincoln LSFACTORY OEM SERVICE PROCEDURE
Interior Lighting
FRONT ELECTRONIC MODULE (FEM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Action |
|---|---|---|---|
| B1319 | Driver Door Ajar Circuit Failure | FEM | Go To PINPOINT TEST C . |
| B1327 | Passenger Door Ajar Circuit Failure | FEM | Go To PINPOINT TEST C . |
| B1342 | ECU Is Defective | FEM | CLEAR the DTC. REPEAT the FEM self-test. If DTC B1342 is retrieved, INSTALL a new FEM. REFER to MULTIFUNCTION ELECTRONIC MODULES . |
| B2477 | Module Configuration Failure | FEM | REFER to MODULE CONFIGURATION . |
REAR ELECTRONIC MODULE (REM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Action |
|---|---|---|---|
| B2245 | Passenger Rear Door Ajar Circuit Open | REM | Go To PINPOINT TEST C . |
| B1331 | Luggage Compartment Ajar Rear Door Circuit Failure | REM | Go To PINPOINT TEST E . |
| B1342 | ECU Is Defective | REM | CLEAR the DTC. RETRIEVE the DTCs. If DTC B1342 is retrieved, INSTALL a new REM. REFER to MULTIFUNCTION ELECTRONIC MODULES . |
| B2243 | Diver Rear Door Ajar Circuit Open | REM | Go To PINPOINT TEST C . |
| B2477 | Module Configuration Failure | REM | REFER to MODULE CONFIGURATION . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
