Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Lincoln Town Car Protection SeriesFACTORY OEM SERVICE PROCEDURE
Speed Control
POWERTRAIN CONTROL MODULE (PCM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTCs | Description | Source | Perform Test |
|---|---|---|---|
| P0500 | Vehicle Speed Sensor (VSS) Malfunction | PCM | Refer to AUTOMATIC TRANSAXLE/TRANSMISSION to continue diagnosis of the VSS. |
| P0579 | Cruise Control Multifunction Input A Circuit Range/Performance | PCM | GO to PINPOINT TEST C . |
| P0581 | Cruise Control Multifunction Circuit High | PCM | GO to PINPOINT TEST C . |
| P0720 | Output Shaft Speed (OSS) Sensor Circuit | PCM | Refer to AUTOMATIC TRANSAXLE/TRANSMISSION to continue diagnosis of the OSS sensor. |
| P0721 | Output Shaft Speed (OSS) Sensor Circuit Range/Performance | PCM | Refer to AUTOMATIC TRANSAXLE/TRANSMISSION to continue diagnosis of the OSS sensor. |
| P0722 | Output Shaft Speed (OSS) Sensor Circuit No Signal | PCM | Refer to AUTOMATIC TRANSAXLE/TRANSMISSION to continue diagnosis of the OSS sensor. |
| P1500 | Vehicle Speed Sensor (VSS) Intermittent | PCM | Refer to AUTOMATIC TRANSAXLE/TRANSMISSION to continue diagnosis of the VSS. |
| P1501 | Vehicle Speed Sensor (VSS) Out of Self-Test Range | PCM | Refer to AUTOMATIC TRANSAXLE/TRANSMISSION to continue diagnosis of the VSS. |
| P1572 | Brake On/Off Circuit Failure | PCM | GO to PINPOINT TEST B . |
| P1703 | Brake On/Off Circuit Failure | PCM | GO to PINPOINT TEST B . |
| P1705 | Transmission Range Sensor Out of Self-Test Range | PCM | Refer to AUTOMATIC TRANSAXLE/TRANSMISSION to continue diagnosis of the digital transmission (TR) range sensor. |
| All other DTCs | - | PCM | REFER to INTRODUCTION - GASOLINE . |
LIGHTING CONTROL MODULE (LCM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTCs | Description | Source | Perform Test |
|---|---|---|---|
| B1485 | Brake Pedal Input Circuit Short to Battery | LCM | Refer to EXTERIOR LIGHTING to continue diagnosis of the stoplamp switch. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
