Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Lincoln Town Car Protection SeriesFACTORY OEM SERVICE PROCEDURE
Climate Control System DTCS
POWERTRAIN CONTROL MODULE (PCM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| P0537 | A/C evaporator temperature (ACET) circuit low input | REFER to INTRODUCTION - GASOLINE . |
| P0538 | A/C evaporator temperature (ACET) circuit high input | REFER to INTRODUCTION - GASOLINE . |
| P1460 | WOT A/C cutout internal driver malfunction | REFER to INTRODUCTION - GASOLINE . |
| P1469 | Low A/C cycling period | REFER to INTRODUCTION - GASOLINE . |
| P1474 | Low speed fan internal driver failure | REFER to INTRODUCTION - GASOLINE . |
| P1479 | High speed fan internal driver failure | REFER to INTRODUCTION - GASOLINE . |
| P1464 | A/C demand out of self-test range | REFER to INTRODUCTION - GASOLINE . |
REAR REDUNDANT CONTROL MODULE (RRCM) DIAGNOSTIC TROUBLE CODE (DTC) LIST - LATE BUILD
| DTC | Description | Perform Test |
|---|---|---|
| B113D | Rear climate control switch stuck | INSTALL a new rear climate control switch. TEST the system for normal operation. |
| B113E | Rear climate control switch circuit short to ground | GO to PINPOINT TEST P . |
| B113F | Rear climate control switch circuit short to battery | GO to PINPOINT TEST Q . |
| U1178 | SCP (J1850) Invalid or missing data for climate control | REFER to MODULE COMMUNICATIONS NETWORK to diagnose a network concern. |
DUAL AUTOMATIC TEMPERATURE CONTROL (DATC) MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B2266 | Driver side blend door failure or short | GO to PINPOINT TEST A . |
| B2267 | Passenger side blend door failure or short | GO to PINPOINT TEST A . |
| B1251 | In-vehicle temperature sensor open circuit | GO to PINPOINT TEST B . |
| B1253 | In-vehicle temperature sensor short to ground | GO to PINPOINT TEST B . |
| B1255 | Ambient temperature sensor open circuit | GO to PINPOINT TEST C . |
| B1257 | Ambient temperature sensor short to ground | GO to PINPOINT TEST C . |
| B1259 | A/C solar radiation sensor open circuit | GO to PINPOINT TEST D . |
| B1261 | A/C solar radiation sensor circuit short to ground | GO to PINPOINT TEST D . |
| B1242 | Recirc door short/failure | GO to PINPOINT TEST E . |
| B1263 | Panel/defrost door short/failure | GO to PINPOINT TEST F . |
| B1264 | Floor door short/failure | GO to PINPOINT TEST F . |
| B2268 | Steering wheel auxiliary control switch open circuit | If vehicle is not equipped with steering wheel control switches, ignore this code and continue diagnosis. If vehicle is equipped with steering wheel control switches, GO to PINPOINT TEST G . |
| B2269 | Steering wheel auxiliary control switch circuit short to ground | GO to PINPOINT TEST G . |
| U1040 | SCP invalid or missing data for function read vehicle speed | If DTCs are present in the instrument cluster, diagnose those codes first. CLEAR the DTCs. If the EATC DTC returns, INSTALL a new EATC module. REFER to AIR DISTRIBUTION AND FILTERING
. If no DTCs are present in the instrument cluster, CLEAR the DTCs. If the EATC DTC returns, INSTALL a new EATC module. REFER to AIR DISTRIBUTION AND FILTERING . TEST the system for normal operation. |
| U1073 | SCP invalid or missing data for engine coolant | If DTCs are present in the instrument cluster, diagnose those codes first. CLEAR the DTCs. If the EATC DTC returns, INSTALL a new EATC module. REFER to AIR DISTRIBUTION AND FILTERING . TEST the system for normal operation. If no DTCs are present in the instrument cluster, CLEAR the DTCs. If the EATC DTC returns, INSTALL a new EATC module. REFER to AIR DISTRIBUTION AND FILTERING . TEST the system for normal operation. |
| U1112 | SCP invalid or missing data for interior lamps | GO to INSPECTION AND VERIFICATION to continue diagnosis. |
| B1342 | Module faulted | Button held too long may set DTC. Attempt to clean buttons. If code returns, INSTALL a new EATC module. REFER to CONTROL COMPONENTS . |
| B1200 | Stuck button | INSTALL a new EATC module. REFER to CONTROL COMPONENTS . |
| B2477 | Module not configured - LHD only | CONFIGURE the EATC module. REFER to MODULE CONFIGURATION . |
| B1676 | Voltage out of range | GO to PINPOINT TEST H . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
