Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Lincoln Navigator RWDFACTORY OEM SERVICE PROCEDURE
General Specifications
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Fluid | |
|
CAUTION:
MERCON®, MERCON® V and MERCON® SP are not interchangeable transmission fluids. The use of any other fluid or cleaning agents will cause internal transmission damage.
|
|
| MERCON® SP Automatic Transmission Fluid XT-6-QSP | MERCON® SP |
| Fluid Capacities | |
| All | 9L (9.5 quarts) |
| Fluid Filter | |
| Internal to the transmission. Part of the transmission fluid pan. | - |
| Lubricants | |
| Multi-Purpose Grease XG-4 and/or XL-5 | ESB-MIC93-B |
| Transmission Fluid Flow | |
| Transmission fluid cooler fluid flow | 0.6 liters (20 ounces) in 15 seconds |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.