Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Lincoln Navigator RWDFACTORY OEM SERVICE PROCEDURE
Instrument Cluster DTCS
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Perform Test |
|---|---|---|---|
| B1201 | Fuel Sender Circuit Failure | Instrument Cluster | Go To PINPOINT TEST B: INCORRECT FUEL GAUGE INDICATION . |
| B1204 | Fuel Sender Circuit Short to Ground | Instrument Cluster | Go To PINPOINT TEST B: INCORRECT FUEL GAUGE INDICATION . |
| B1205 | EIC Switch-1 Assembly Circuit Failure | Instrument Cluster | INSTALL a new instrument cluster. Refer to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B1209 | EIC Switch-2 Assembly Circuit Failure | Instrument Cluster | INSTALL a new instrument cluster. Refer to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B1255 | Air Temperature External Sensor Circuit Open | Instrument Cluster | Go To PINPOINT TEST AC: THE INTEGRATED CIRCUIT DISPLAY IS INOPERATIVE . |
| B1257 | Air Temperature External Sensor Circuit Short to Ground | Instrument Cluster | Go To PINPOINT TEST AC: THE INTEGRATED CIRCUIT DISPLAY IS INOPERATIVE . |
| B1317 | Battery Voltage High | Instrument Cluster | Go To PINPOINT TEST C: INCORRECT VOLTAGE GAUGE INDICATION (EXPEDITION ONLY) . |
| B1318 | Battery Voltage Low | Instrument Cluster | Go To PINPOINT TEST C: INCORRECT VOLTAGE GAUGE INDICATION (EXPEDITION ONLY) . |
| B1342 | ECU is Defective | Instrument Cluster | INSTALL a new instrument cluster. Refer to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B1360 | Ignition Run/Acc Circuit Open | Instrument Cluster | Go To PINPOINT TEST A: NO COMMUNICATION WITH THE INSTRUMENT CLUSTER . |
| B2143 | NVM Memory Failure | Instrument Cluster | Go To PINPOINT TEST AD: THE INSTRUMENT CLUSTER IS INOPERATIVE . |
| C1284 | Oil Pressure Switch Failure | Instrument Cluster | For Expedition, Go To PINPOINT TEST D: INCORRECT OIL PRESSURE GAUGE INDICATION (EXPEDITION ONLY) . For Navigator, Go To PINPOINT TEST X: THE OIL PRESSURE WARNING INDICATOR IS NEVER/ALWAYS ON - NAVIGATOR . |
| U1073 | Invalid or Missing Data For Engine Coolant | Instrument Cluster | For temperature gauge, Go To PINPOINT TEST E: INCORRECT TEMPERATURE GAUGE INDICATION . For temperature warning indicator, Go To PINPOINT TEST Y: THE TEMPERATURE WARNING INDICATOR IS NEVER/ALWAYS ON - NAVIGATOR . |
| U1123 | Invalid or Missing Data For Odometer | Instrument Cluster | Go To PINPOINT TEST G: THE SPEEDOMETER/ODOMETER IS INOPERATIVE/INACCURATE . |
| U2013 | Compass Module is Not Responding | Instrument Cluster | Refer to INFORMATION AND MESSAGE CENTER . |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
