Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Lincoln Aviator RWDFACTORY OEM SERVICE PROCEDURE
Alignment Specifications
ALIGNMENT SPECIFICATIONS
| Item | LH | RH | Total/ Split |
|---|---|---|---|
| Front | |||
| Caster | 5.3° +/-1.0° | 5.3 °+/- 1.0° | 0°+/-0.5° |
| Camber | -0.5° +/-0.8° | -0.5°+/-0.8° | 0°+/-0.8° |
| Toe (positive value is toe-in, negative value is toe-out) | - | - | 0.24° +/-0.25° |
| Rear | |||
| Camber | -0.95° +/-0.8° | -0.95° +/-0.8° | 0°+/-0.8° |
| Toe (positive value is toe-in, negative value is toe-out) | 0.08° +/-0.25° | 0.08° +/-0.25° | 0.16°+/-0.25° |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
