2004 Lincoln Aviator AWDFACTORY OEM SERVICE PROCEDURE

Torque Specifications

WARNING: This page is about a different car, the 2003 Lincoln Aviator. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Auxiliary housing bolts 7 - 62
Auxiliary housing nut 7 - 62
Compressor manifold bolt 20 15 -
Compressor nuts 25 18 -
Compressor studs 13 10 -
Compressor bolt 25 18 -
Cooling module bolts 12 9 -
Air conditioning (A/C) fitting (peanut fitting) nuts 8 - 71
TXV manifold and tube bracket nut 7 - 62
TXV manifold bolt 21 15 -
TXV manifold bolt 21 15 -
TXV bracket bolts 9 - 80
Receiver drier bracket nut 6 - 53
Receiver drier bracket bolt 6 - 53
Auxiliary line floorpan bracket nuts 8 - 71
Auxiliary line bracket bolts 8 - 71
Spare tire carrier bolts 23 17 -
Auxiliary line bracket nuts 8 - 71
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.