2003 Lincoln Navigator RWDFACTORY OEM SERVICE PROCEDURE

General Specifications

Identifying General Specifications (1 Of 2)

Item Specification
Fluid (1) 
Motorcraft MERCON® Multipurpose (ATF) Transmission Fluid XT-2-QDX MERCON®
Fluid Capacities (2) 
4R100 4x2 15.0L (15.9 Quarts) Approximately Dry Fill Capacity
4R100 4x4 15.5L (15.9 Quarts) Approximately Dry Fill Capacity
Fluid Filter 
Inline Transmission Fluid Filter Kit XC3Z-7B155-AA
Inline Transmission Fluid Filter XC3Z-7B155-BA
Lubricants 
CAUTION:
(1) Using a transmission fluid that indicates a dual usage MERCON® and MERCON®V in a transmission application requiring MERCON®, may cause transmission damage. Use of any fluid other than the recommended fluid may cause transmission damage.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.