2001 Lincoln LS 3.9 AFACTORY OEM SERVICE PROCEDURE

Power Windows DTCS

DRIVER'S DOOR MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Perform Test
B1342 ECU Defective Using new generation star tester, clear and document all DTCs. Perform Driver's Door Module (DDM) self-test.
If DTC B1342 is retrieved again, replace DDM.
See DRIVER'S DOOR MODULE
B1400 Driver's Window One-Touch Down Window Relay Circuit Short To Voltage Q
B1405 Driver's Power Window Down Circuit Short To Voltage F
B1408 Driver's Power Window Up Circuit Short To Voltage F
B1416 Left Rear Power Window Motor Circuit Short To Voltage N
B1420 Passenger's Power Window Motor Circuit Short To Voltage H
B1424 Right Rear Power Window Motor Circuit Short To Voltage K
FRONT ELECTRONIC MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Perform Test
B1342 ECU Defective Using NGS tester, retrieve and document all DTCs. Perform Front Electronic Module (FEM) self-test.
If DTC B1342 is retrieved again, replace FEM.
See FRONT ELECTRONIC MODULE .
B2214 Passenger's Front Window Up Switch Short To Voltage G
B2215 Passenger's Front Window Down Switch Short To Voltage G
REAR ELECTRONIC MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Perform Test
B1342 ECU Defective Using NGS tester, clear and document all DTCs. Perform Rear Electronic Module (REM) self-test.
If DTC B1342 is retrieved again, replace REM.
See REAR ELECTRONIC MODULE .
B2174 Left Rear Window Remote Up Switch Short To Voltage M
B2178 Left Rear Window Remote Down Switch Short To Voltage M
B2190 Right Rear Window Remote Up Switch Short To Voltage J
B2194 Right Rear Window Remote Down Switch Short To Voltage J
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.