Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Lincoln Town Car SignatureFACTORY OEM SERVICE PROCEDURE
Module Communications Network (DTCS)
MODULE COMMUNICATIONS NETWORK (FRONT RADIO CONTROL UNIT) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1342 | ECU Defective | Using NGS tester, retrieve and document all continuous DTCs. Perform front radio control unit self-test. If DTC B1342 is retrieved again, replace front radio control unit. |
| B2401 | Audio Tape Deck Mechanical Fault | Remove audio tape. Using NGS tester, clear DTCs. Perform front radio control unit self-test. If B2401 is retrieved, repair or replace front radio control unit. |
| B2402 | Audio CD/DJ Thermal Shutdown | Repair audio system concern. |
| B2403 | Audio CD/DJ Internal Fault | Repair audio system concern. |
| B2404 | Audio Steering Wheel Switch Circuit Failure | Repair audio system concern. |
| B2405 | Audio Single-Disc CD Player Thermal Shutdown Fault | Repair audio system concern. |
| B2406 | Audio Single-Disc CD Player Internal Fault | Repair audio system concern. |
| U2003 | Audio CD/DJ Is Not Responding | Repair audio system concern. |
| U2005 | Audio Rear Integrated Control Panel Unit Is Not Responding | This DTC is retrieved if vehicle is not equipped with Rear Audio Control Panel (RACP) or RACP is disconnected or inoperative. |
| U2008 | Audio Phone Is Not Responding | Repair cellular phone system concern. |
| U2014 | Audio Subwoofer Unit Is Not Responding | Repair audio system concern. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
