Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Using Keyless Entry Keypad
Remote Anti-Theft Personality (RAP) module enable/disable mode allows autolock feature to be turned on or off. To enter programming mode, perform the following steps within 30 seconds:
- Close all doors.
- Ensure ignition is off.
- Turn ignition switch from OFF to RUN position.
- Press power door lock switch UNLOCK button 3 times.
- Turn ignition switch from RUN to OFF position.
- Press power door lock switch UNLOCK button 3 times.
- Turn ignition switch from OFF to RUN position.
- RAP module should chirp horn indicating RAP module is in enable/disable mode and ready to accept program changes.
To enable/disable AUTOLOCK, press power door lock switch UNLOCK button once to select AUTOLOCK programming mode. To change current state of autolock, press power door lock switch to LOCK. RAP module will chirp horn once to indicate autolock has been disabled or chirp horn once followed by a long horn blast to indicate autolock has been enabled.
To enable/disable PERSONALITY, press power door lock switch UNLOCK button twice to select PERSONALITY programming mode. To change current state of personality, press power door lock switch to LOCK. RAP module will chirp horn once to indicate personality has been disabled or chirp horn once followed by a long horn blast to indicate personality has been enabled.
To end programming mode, turn ignition off. RAP module should chirp once to verify a feature change.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.