Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Power Mirror System: Programming
Set outside mirrors and driver's seat to desired position. Press memory SET switch which activates set switch Light Emitting Diode (LED). Within 5 seconds (before LED goes out) select memory position. To select position 1, press memory switch button 1. To select position 2, press memory switch button 2. To select position 3, press memory switch buttons 1 and 2 simultaneously. Memory position can be recalled only while vehicle is in Park or Neutral with ignition switch in OFF position.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.