Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Lincoln ContinentalFACTORY OEM SERVICE PROCEDURE
Power Memory Mirrors DTCS
DRIVER'S SEAT MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1342 | ECU Defective | Using NGS tester, retrieve and document continuous DTCs. Clear all DTCs. Perform Driver's Seat Module (DSM) self-test. If DTC B1342 is retrieved again, replace DSM. |
| B1667 | Driver's Mirror Up/Down Circuit Failure | C |
| B1668 | Driver's Mirror Right/Left Circuit Failure | C |
| B1669 | Passenger's Mirror Up/Down Circuit Failure | C |
| B1670 | Passenger's Mirror Right/Left Circuit Failure | C |
| B2312 | Passenger's Mirror Horizontal Feedback Potentiometer - Circuit Failure | D |
| B2315 | Passenger's Mirror Horizontal Feedback Potentiometer - Short To Ground | D |
| B2316 | Passenger's Mirror Vertical Feedback Potentiometer - Circuit Failure | D |
| B2319 | Passenger's Mirror Vertical Feedback Potentiometer - Short To Ground | D |
| B2320 | Driver's Mirror Horizontal Feedback Potentiometer - Circuit Failure | D |
| B2323 | Driver's Mirror Horizontal Feedback Potentiometer - Short To Ground | D |
| B2324 | Driver's Mirror Vertical Feedback Potentiometer - Circuit Failure | D |
| B2327 | Driver's Mirror Vertical Feedback Potentiometer - Short To Ground | D |
DRIVER'S DOOR MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1342 | DDM Defective | Using NGS tester, retrieve and document continuous DTCs. Clear all DTCs. Perform Driver's Door Module (DDM) self-test. If DTC B1342 is retrieved again, replace DDM. |
| B1541 | Driver's Mirror Short To Voltage | C |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.