Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Driver Door Master Window Switch
Remove driver door master window switch from vehicle. See POWER WINDOW SWITCHΒ under REMOVAL & INSTALLATION. Using ohmmeter, check for continuity between switch terminals in specified switch positions. See DRIVER DOOR MASTER WINDOW SWITCH TEST table. See Fig 1 and Fig 2 . Replace driver door master window switch if it does not test as specified.
| Switch Position | Continuity Between Terminals |
|---|---|
| Neutral | C1-1, C1-3, C1-4, C1-5, C1-6, C2-1, C2-2, C2-4, C2-5, C2-6 & C2-7 |
| Left Front Up | C1-2 & C2-4; C1-1 & C2-5 |
| Left Front Down | C1-2 & C2-5; C1-1 & C2-4 |
| Right Front Up | C1-2 & C2-6; C1-1 & C2-7 |
| Right Front Down | C1-2 & C2-7; C1-1 & C2-6 |
| Left Rear Up | C1-2 & C1-4; C1-1 & C1-3 |
| Left Rear Down | C1-2 & C1-3; C1-1 & C1-4 |
| Right Rear Up | C1-2 & C1-5; C1-1 & C1-6 |
| Right Rear Down | C1-2 & C1-6; C1-1 & C1-5 |
| Lock-Out Off | C1-2 & C2-3 |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
