Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1998 Lincoln Mark VIII BaseFACTORY OEM SERVICE PROCEDURE
Power Windows DTCS
DRIVER DOOR MODULE (DDM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1342 | ECU Defective | Using NGS tester, perform DDM Self-Test. If DDM DTC B1342 is retrieved, replace DDM and retest system operation. |
| B1549 | Power Window Master Switch Circuit Short To Voltage | Perform DTC B1549 MASTER WINDOW SWITCH SHORTED TO BATTERY VOLTAGE under DIAGNOSTIC TESTS. |
STEERING COLUMN/IGNITION/LIGHTING (SCIL) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Source Module | Perform Test |
|---|---|---|
| B1342 | SCIL | Using NGS tester, perform SCIL module Self-Test. If DTC B1342 is retrieved, replace SCIL module and retest system operation. ECU Defective |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.