1993 Lincoln Mark VIIIFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 2.13 LBS. 0.96 KG R-134a S
Automatic Transmission Fluid 12.30 QTS. 11.64 L Automatic Transmission Fluid DEXRON II S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Engine Coolant 16.00 QTS. 15.14 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Oil 6.00 QTS. 5.67 L SAE 5W-20 Premium Synthetic Blend Motor Oil Refer to Engine Oil recommended applications for SAE 5W-20 and 5W-30 motor oils TSB No. 02-1-9. S
Fuel Tank 18.00 GALS. 68.13 L S
Power Steering Fluid N/A N/A FORD Premium Power Steering Fluid or equivalent Fill between "max" and "min" lines on reservoir. S
Windshield Washer Fluid N/A N/A Ultra-Clear Windshield Washer Fluid Fill to line on reservoir. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.