1990 Lincoln Town Car BaseFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 2.44 LBS. 1.1 KG R-12 S
Automatic Transmission Fluid 12.30 QTS. 11.64 L Automatic Transmission Fluid MERCON S
Brake Fluid N/A N/A DOT 3 Brake Fluid Fill to line on reservoir. S
Differential Gear Oil 3.75 PTS. 1.77 L FORD Hypoid Gear Oil Add 4 oz. of Additive Friction Modifier (C8AZ-19B546-A). S
Engine Coolant 14.10 QTS. 13.34 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Oil w/Filter 5.00 QTS. 4.73 L SAE 10W-30 S
Engine Oil w/o Filter 4.00 QTS. 3.78 L SAE 10W-30 S
Fuel Tank 20.00 GALS. 75.7 L S
Power Steering Fluid 2.50 PTS. 1.18 L Automatic Transmission Fluid Type F S
Windshield Washer Fluid 2.10 QTS. 1.98 L Ultra-Clear Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.