Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Lexus UX 200 BaseFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 1.05 LBS. | 0.47 KG | HFO-1234yf (R-1234yf) | S | |||
| Automatic Transmission Fluid | Drain and Refill | 9.00 QTS. | 8.51 L | TOYOTA Genuine CVT Fluid FE | S | ||
| Brake Fluid | N/A | N/A | SAE J1703 or FMVSS No. 116 DOT 3 Brake Fluid, FMVSS No. 116 DOT 4 or SAE J1704 | S | |||
| Engine Coolant | 7.00 QTS. | 6.62 L | TOYOTA Super Long Life Coolant or Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology | DO NOT use plain water alone. The fluid capacity is the quantity of reference. | S | ||
| Engine Oil | Drain and Refill,w/Filter | 4.90 QTS. | 4.63 L | TOYOTA Genuine Motor Oil. API SN/RC miltigrade engine oil: SAE 0W-16 | If SAE 0W-16 is not available SAE 0W-20 oil may be used. However, it must be replaced with SAE 0W-16 at the next oil change. | S | |
| Engine Oil | Drain and Refill,w/o Filter | 4.50 QTS. | 4.25 L | TOYOTA Genuine Motor Oil. API SN/RC miltigrade engine oil: SAE 0W-16 | If SAE 0W-16 is not available SAE 0W-20 oil may be used. However, it must be replaced with SAE 0W-16 at the next oil change. | S | |
| Fuel Tank | 12.40 GALS. | 46.93 L | S | ||||
| Windshield Washer Fluid | N/A | N/A | Washer Fluid | Refer to the freezing temperatures listed on the washer fluid tank. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.